Posts made by george

@jugg 确认摄像头支持的格式，分辨率，帧率？是否OK

@jugg 使用 kmssink plane-id=88

@allen USB TF EMMC默认优先级。可以通过UBOOT源码修改顺序。

The latest ubuntu22.04 firmware（20230303-ubuntu-22.04-preinstall-desktop-arm64） integrates ffmpeg and gstreamer video frames, and can call the hardware codec module of Rockchip, which can greatly improve the video codec performance of the device and reduce the CPU load.

• With kmssink, the CPU utilization of 4K video playback is reduced to about 10%.The disadvantage is that it occupies one layer.

• The following command can obtain layer information.

   sudo cat /sys/kernel/debug/dri/0/state | grep "plane"

• Use the following command to play the video and replace xxx.mp4 with the actual path. 88 represents the layer, kmssink only supports the display of Esmart layer.

   gst-play-1.0  xxx.mp4 --videosink='kmssink plane-id=88'

• You can also use other plug-ins, such as xvimagesink glimagesink waylandsink, etc.

@jugg 把FS更新到最新再测试一下。早期的镜像可能会有包的依赖问题。

@jugg 用的哪个固件？

@jugg 两路4K解码+1路编码这个从性能来讲是没有问题的。接口部分后续主要以GST为主，这个目前还有一些适配问题在处理中。等后续出稳定版本会在论坛发布。

@jugg 谢谢你的提议，最近一直在处理GST的兼容性问题，这个弄完以后会考虑上一些实例包。先上传一些底层接口的文档，你可以先看一下。
Rockchip_Developer_Guide_MPP_CN.pdf
Rockchip_Developer_Guide_MPP_EN.pdf
Rockchip_Developer_Guide_RGA_CN.pdf
Rockchip_Developer_Guide_RGA_EN.pdf
Rockchip_User_Guide_Linux_Gstreamer_CN.pdf
Rockchip_User_Guide_Linux_Gstreamer_EN.pdf

@顾真牛 这个还没有贴片回来，拿到后会第一时间反馈。

@jugg 可以使用FFMPEG，解码部分已经集成硬件解码，GST部分插件也可以调用到rkmpp解码，也可以直接调用RKMPP，这个需要自行研究一下文档。关于裁剪缩放效率问题可以考虑使用RGA硬件加速模块。

@Twsuts 源码修改DTS和config文件，编译替换就好了。

@myhexb 联系一下代理商，申请售后。

@Mcfly 从现象看应该是UBOOT下USB驱动不够完善导致的，简单的方法关闭uboot下USB设备的注册，到内核以后再加载USB驱动。或者等我们更新UBOOT代码，这个因为手上暂时没有设备，会稍微慢一些。

@myhexb 可以换个镜像再测试。从log看的情况就是卡没有识别到或者rootfs没有成功挂载。

@myhexb 这个是镜像没有制作成功。如果有读卡器可以先格式化一次卡，然后再制作，闪迪的卡我一直在用，没有什么问题。

@myhexb 串口打印一下启动的日志信息，发上来。

@Twsuts 正常需要初步验证和测试完成以后，底板资料才可以开放。目前核心板已经是稳定版本。

@lej40 The DP interface cannot be configured as a USB3.1 interface. If two USB3.1 interfaces are not enough, it can be extended by using an external USB HUB. Two USB2.0 connectors are reserved on the back of the CP4 machine for users to use.

@顾真牛 有标准PCIE接口，USB3.0不够可以扩展。外置4个USB接口，2个U2 两个U3。一般场景可以满足。

@Twsuts 底板已经在制版中。预计月底可以出来。

Top-level interface

• The 2X20 pin interface is compatible with CP4 and integrates multiple UART, I2C, SPI, CAN and other functions.

• Three function keys are PWR, RST and LOADER.

• 2X2 PIN POE connector，such as CP4.

• 30pin fpc vertical connector can directly drive standard 30PIN EDP interface LCD. Resolution up to 3840 * 2160

• The MICRO HDMI-RX interface can support up to 4KP60 video signal input.

• TF card with self-locking.

• Two native USB3.0 interfaces, one of which supports OTG function.

• Two Gigabit Ethernet interfaces, one of which supports POE function.

• Two HDMI2.1 interfaces with a maximum resolution of 8K.

• Stereo headphone stand with MIC input function.

• Two native USB2.0 interfaces.

• One TYPEC power supply interface, consistent with CP4.

• The external power interface of 2PIN can support DC power input.

• 1 standard PCIE 4X connector, currently only supports PCIE3.0 2X/1X mode.

• SSD interface, only PCIE-M2-2242 size hard disk is supported.

• Standard 7PIN SATA3.0 interface, 4PIN power interface.

• M.2 WIFI module interface, supporting multiple general WIFI modules.

• Dual MIPI LCD interfaces support simultaneous output of two MIPI interface LCDs. The resolution of a single LCD is up to 1920 * 1200. It supports the MIPI DSC function.

• Four independent MIPI camera interfaces support four camera inputs at the same time. It can be configured as 2X4LINE or 4X2LINE mode.

Bot-level interface

• One 30PIN EDP interface can directly drive LCD output.

• MXM 314PIN core board connector.

Welcome to put forward good suggestions. We can consider revising them.

@大法师 The latest ubuntu22.04 image can already support this camera.

• 20230210-ubuntu-22.04-preinstalled-desktop-arm64-coolpi.rar

• V4L2-TEST can start the camera by operating the video11 node

0ef06ad8-64c6-4d7c-b1a2-4f62d01ea452-image.png

@jack_admin 那款是定制的MINIPC，CM5的底板是完全重新设计的，接口非常齐全，基本接口下周可以发出来。

@ccjjww1222 可以通过脚本把你做好的系统备份一下。

@xws 部分适配器功率切换瞬间会掉电，会导致机器重启。

@tonyone0902

• RTC spare battery specification MS621FE-FL11E_2017-08-18.PDF

• Welding position

@tonyone0902 确认loaer有没有更新到最新，可以按照下图链接更新：https://www.cool-pi.com/topic/162/how-to-upgrade-the-boot-loader-of-coolpi-4b?_=1675398036886

@tonyone0902 卡格式化一下重新制作。

@ccjjww1222 shell输出命令，然后把edid.bin上传：
cat /sys/class/drm/card0-HDMI*/edid > /data/edid.bin

• DTS is modified as follows

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-cp4.dts b/arch/arm64/boot/dts/rockchip/rk3588s-cp4.dts
index dc232a407a8c..da9796bfe7a3 100755
--- a/arch/arm64/boot/dts/rockchip/rk3588s-cp4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-cp4.dts
@@ -223,6 +223,24 @@ codec {
                 };
         };
 
+       pdmics: dummy-codec {
+        status = "okay";
+        compatible = "rockchip,dummy-codec";
+        #sound-dai-cells = <0>;
+    };
+
+    pdm_mic_array: pdm-mic-array {
+        status = "okay";
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "rockchip,pdm-mic-array";
+        simple-audio-card,cpu {
+            sound-dai = <&pdm1>;
+        };
+        simple-audio-card,codec {
+            sound-dai = <&pdmics>;
+        };
+    };
+       
        leds: leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -944,6 +962,14 @@ &route_hdmi0 {
        status = "okay";
 };
 
+&pdm1 {
+    status = "okay";
+    rockchip,path-map = <0 1 2 3>;
+    #sound-dai-cells = <0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&pdm1m1_clk &pdm1m1_sdi1>;
+};
+
 &i2c0 {
        status = "okay";
        pinctrl-names = "default";
@@ -1301,7 +1327,7 @@ ir_key1 {
 
 &spi0 {
        pinctrl-names = "default";
-       status = "okay";
+       status = "disabled";
 
        max-freq = <48000000>; /* spi internal clk, don't modify */
         spi_dev@0 {

• Device information

coolpi@Ubuntu:~$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 2: rockchipes8316c [rockchip,es8316-codec], device 0: fe470000.i2s-ES8316 HiFi es8316.7-0010-0 [fe470000.i2s-ES8316 HiFi es8316.7-0010-0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 3: rockchippdmmica [rockchip,pdm-mic-array], device 0: fe4c0000.pdm-dummy_codec dummy-codec-0 [fe4c0000.pdm-dummy_codec dummy-codec-0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0