@Kanade
建议切换到6.1的背个版本。默认的代码会生成一个头文件的包，解压到/usr目录即可。
https://github.com/coolpi-george/coolpi-kernel

@george Thanks a lot

@nosorrow 你把你更新失败的信息贴上来很难吗？开头忽略的原因有很多，谁知道你是因为源配置错误，还是压根没联网？还是因为用的是国外的源被屏蔽了？

想解决问题要先把你遇到的问题描述清楚好不好，光在这里有一句没一句的说，大家压根没法帮你。

你贴个日志或者截图出来行么，还有你更新源之前确保你联网了吗？DNS 配置正常了吗？

@nosorrow
参考如下文档安装中文输入法：
https://cool-pi.com/topic/470/ubuntu22-04安装fcitx5中文输入法?_=1721898203596

Have you updated your mesa from apt source?
Like the post you linked said. You have to keep mesa version with coolpi ppa if you want hardware accelaration.

Kernel 5.10 is using panfork, Which is specific mesa version needed.
If you want newer version mesa you have to switch to kernel 6.10 and use panthor driver instead.

@28717885
参考如下文档
https://cool-pi.com/topic/514/cool-pi-cm5-laptop-linux-quick-start-guide

@Momo-0 Thank for your reply.
I think the point is pcie 3.0 /4.0
maybe pcie 3.0 version nvme ssd should be okay.

@masterli
性能肯定会有损失，从目前群控那边的情况来看，没什么太大问题。

@george 我可以在ubuntu系统上安装树莓派的工具Raspberry Pi Diagnostics吗

@Yannis
sudo apt update
sudo apt upgrade
按顺序执行

@admin 这个问题之前在另外一款INTEL的相机上没有复现到现象。目前你用的这款暂时没有。

@george
这个是CM5的能更新开机logo的吗?

Meanwhile one can pin PPA to prevent upgrades:

$ cat /etc/apt/preferences.d/coolpi-ppa-priority Package: * Pin: release o=LP-PPA-george-coolpi-mali-g610 Pin-Priority: 2000 Package: * Pin: release o=LP-PPA-george-coolpi-multimedia Pin-Priority: 2000 Package: * Pin: release o=LP-PPA-george-coolpi-rknpu Pin-Priority: 2000

@george Can you tell me the specific command? Sorry I am new to linux.

@george Thank you for your reply.

@george Yes... it has been resolved. It was a cable connection problem. thank you

Now I fully understand the problem. Please refer to this part for others as well.

There was a problem with the power supply.

@george Thank you for your reply.

这个啥时候出啊 都这么久了 要到明年？

@mtiqbal 123

@大法师 Thank you for your reply. I will check with the information you provided.have a good day

@george
网上找的基本都是虚拟键盘 没找到什么有效的方法
这个不是虚拟键盘 只有在用触摸屏的时候才会出现
而且即使光标在文本框内 通过这个键盘也无法输入

@gbmichael28 Thanks! Which page link? we will update it.

@george thank you for the reply.As you said, we have confirmed that it is a power issue. Thank you. Have a nice day.