Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
G
@王猛龙 目前没有做deepin的适配，原理上是可以支持的，内存卡理论没有容量限制，只和文件系统相关。
@santu 重启和重新上电以后运行如下命令发出来
No one has replied
@Orion 参数如下帖子处理，增加规则文件 https://www.cool-pi.com/topic/136/coolpi-4b-python3-gpio-operation-compatable-with-raspberry-pi/21?_=1694425872738
@AugustRobot_Zou 按照5V 3A的标准来配置。一般散热按照12W评估。正常工作也就5W左右。
B
@george 谢谢。那就用这个换
J
@Tourists-0
参考修改内核设备树文件，举例使能can1
A
@george 是5V的，那应该是这个原因了
@edwardzhou 用U盘备份安装系统，不用考虑移除emmc
@lej40 said in Type c power port:
Is the the type-c PD port also a USB-c data port
Sorry,This port is used for power supply and has no data connection.
@tonyone0902 如下图所示，板子的BOTTOM面有测试点，可以焊接外部电源。 7f4233d9-6a7e-4ea8-b36b-f3d36d8c6cb7-image.png 机器本身不具备电量侦测功能，可以外加库仑计通过I2C接口。
@george 我已经发现了会独占屏幕 锁屏了图像还在。。
@lej40 The DP interface cannot be configured as a USB3.1 interface. If two USB3.1 interfaces are not enough, it can be extended by using an external USB HUB. Two USB2.0 connectors are reserved on the back of the CP4 machine for users to use.
T
@george
Thanks!
@retroman Has been updated, please check.
