• Recent
    • Docs
    • Github
    • 百度网盘
    • Onedrive
    • Official
    • Shop
    • Register
    • Login

    Coolpi 4b Ubuntu20.04 原生系统

    Scheduled Pinned Locked Moved Ubuntu
    41 Posts 10 Posters 3.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      myhexb @george
      last edited by

      @george DDR V1.09 a930779e06 typ 22/11/21-17:50:56
      LPDDR4X, 2112MHz
      channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 D镈DR V1.09 a930779e06 typ 22/11/21-17:50:56
      LPDDR4X, 2112MHz
      channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      Manufacturer ID:0xff
      CH0 RX Vref:29.7%, TX Vref:21.8%,21.8%
      CH1 RX Vref:30.7%, TX Vref:21.8%,22.8%
      CH2 RX Vref:30.7%, TX Vref:20.8%,20.8%
      CH3 RX Vref:29.7%, TX Vref:22.8%,22.8%
      change to F1: 528MHz
      change to F2: 1068MHz
      change to F3: 1560MHz
      change to F0: 2112MHz
      out
      INFO: Preloader serial: 2
      NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
      NOTICE: BL31: Built : 16:20:07, Dec 7 2022
      INFO: spec: 0x13
      INFO: ext 32k is not valid
      INFO: ddr: stride-en 4CH
      INFO: GICv3 without legacy support detected.
      INFO: ARM GICv3 driver initialized in EL3
      INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
      INFO: system boots from cpu-hwid-0
      INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
      INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
      INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
      INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
      INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
      INFO: BL31: Initialising Exception Handling Framework
      INFO: BL31: Initializing runtime services
      INFO: BL31: Initializing BL32
      INFO: hdmirx_handler: dma not on, ret
      I/TC:
      I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022骞?09鏈?20鏃?鏄熸湡浜?09:41:09 CST aarch64
      I/TC: Primary CPU initializing
      I/TC: Primary CPU switching to normal world boot
      INFO: BL31: Preparing for EL3 exit to normal world
      INFO: Entry point address = 0x200000
      INFO: SPSR = 0x3c9

      COOLPI LOADER BY YANYI(Jan 04 2023)

      DRAM: 8 GiB
      Using default environment

      0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
      dp@fde50000 disconnected
      hdmi@fde80000 disconnected
      Autoboot in 1 seconds
      trsv ln0 mon rx cdr lock timeout
      dp@fde50000 disconnected
      hdmi@fde80000 disconnected
      starting USB...
      Bus usb@fc880000: USB EHCI 1.00
      scanning bus usb@fc880000 for devices... 1 USB Device(s) found
      scanning usb for storage devices... 0 Storage Device(s) found

      Device 0: unknown device
      switch to partitions #0, OK
      mmc1 is current device
      Failed to mount ext2 filesystem...
      ** Unrecognized filesystem type **
      Card did not respond to voltage select!
      mmc_init: -95, time 17
      Loading order: usb - tf - emmc
      bank id invalid
      request for 141 failed:-22
      bank id invalid
      request for 141 failed:-22
      resetting USB...
      Bus usb@fc880000: USB EHCI 1.00
      scanning bus usb@fc880000 for devices... 1 USB Device(s) found
      scanning usb for storage devices... 0 Storage Device(s) found
      ** Bad device usb 0 **
      ** Bad device usb 0 **
      switch to partitions #0, OK
      mmc1 is current device
      Failed to mount ext2 filesystem...
      ** Unrecognized filesystem type **
      Failed to mount ext2 filesystem...
      ** Unrecognized filesystem type **
      Card did not respond to voltage select!
      mmc_init: -95, time 16
      Card did not respond to voltage select!
      mmc_init: -95, time 16
      ** Bad device mmc 0 **
      Card did not respond to voltage select!
      mmc_init: -95, time 17
      ** Bad device mmc 0 **
      DDR V1.09 a930779e06 typ 22/11/21-17:50:56
      LPDDR4X, 2112MHz
      channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
      Manufacturer ID:0xff
      CH0 RX Vref:30.7%, TX Vref:21.8%,21.8%
      CH1 RX Vref:30.7%, TX Vref:22.8%,21.8%
      CH2 RX Vref:30.7%, TX Vref:20.8%,20.8%
      CH3 RX Vref:30.7%, TX Vref:22.8%,22.8%
      change to F1: 528MHz
      change to F2: 1068MHz
      change to F3: 1560MHz
      change to F0: 2112MHz
      out
      INFO: Preloader serial: 2
      NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
      NOTICE: BL31: Built : 16:20:07, Dec 7 2022
      INFO: spec: 0x13
      INFO: ext 32k is valid
      INFO: ddr: stride-en 4CH
      INFO: GICv3 without legacy support detected.
      INFO: ARM GICv3 driver initialized in EL3
      INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
      INFO: system boots from cpu-hwid-0
      INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
      INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
      INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
      INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
      INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
      INFO: BL31: Initialising Exception Handling Framework
      INFO: BL31: Initializing runtime services
      INFO: BL31: Initializing BL32
      INFO: hdmirx_handler: dma not on, ret
      I/TC:
      I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022骞?09鏈?20鏃?鏄熸湡浜?09:41:09 CST aarch64
      I/TC: Primary CPU initializing
      I/TC: Primary CPU switching to normal world boot
      INFO: BL31: Preparing for EL3 exit to normal world
      INFO: Entry point address = 0x200000
      INFO: SPSR = 0x3c9

      COOLPI LOADER BY YANYI(Jan 04 2023)

      DRAM: 8 GiB
      Using default environment

      0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
      dp@fde50000 disconnected
      hdmi@fde80000 disconnected
      Autoboot in 1 seconds
      trsv ln0 mon rx cdr lock timeout
      dp@fde50000 disconnected
      hdmi@fde80000 disconnected
      starting USB...
      Bus usb@fc880000: USB EHCI 1.00
      scanning bus usb@fc880000 for devices... 1 USB Device(s) found
      scanning usb for storage devices... 0 Storage Device(s) found

      Device 0: unknown device
      switch to partitions #0, OK
      mmc1 is current device
      Failed to mount ext2 filesystem...
      ** Unrecognized filesystem type **
      Card did not respond to voltage select!
      mmc_init: -95, time 17
      Loading order: usb - tf - emmc
      bank id invalid
      request for 141 failed:-22
      bank id invalid
      request for 141 failed:-22
      resetting USB...
      Bus usb@fc880000: USB EHCI 1.00
      scanning bus usb@fc880000 for devices...

      这个是完全启动 不起来的日志

      1 Reply Last reply Reply Quote 0
      • G
        george @myhexb
        last edited by

        @myhexb 这个是镜像没有制作成功。如果有读卡器可以先格式化一次卡，然后再制作，闪迪的卡我一直在用，没有什么问题。

        M 1 Reply Last reply Reply Quote 0
        • M
          myhexb @george
          last edited by

          @george 第一张闪迪卡各种方式格式化 试了4 5次了 ，第二张也试了一次 还是不行

          G 1 Reply Last reply Reply Quote 0
          • G
            george @myhexb
            last edited by

            @myhexb 可以换个镜像再测试。从log看的情况就是卡没有识别到或者rootfs没有成功挂载。

            M 1 Reply Last reply Reply Quote 0
            • M
              myhexb @george
              last edited by

              @george 换22.04 也还是一样的情况

              大法师大 1 Reply Last reply Reply Quote 0
              • 大法师大
                大法师 @myhexb
                last edited by

                @myhexb 用读卡器连接，插在USB3下层端口，启动试试

                jack@cool-pi.com

                M 2 Replies Last reply Reply Quote 0
                • M
                  myhexb @大法师
                  last edited by

                  @大法师 试了 usb插 硬盘盒子和 读卡器 还是只有京东卡可以启动，闪迪卡可以找到卡 但不能启动 ，重做和换镜像文件都没成功，0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
                  dp@fde50000 disconnected
                  hdmi@fde80000 disconnected
                  Autoboot in 1 seconds
                  trsv ln0 mon rx cdr lock timeout
                  dp@fde50000 disconnected
                  hdmi@fde80000 disconnected
                  starting USB...
                  Bus usb@fc880000: USB EHCI 1.00
                  scanning bus usb@fc880000 for devices... 2 USB Device(s) found
                  scanning usb for storage devices... 1 Storage Device(s) found

                  Device 0: Vendor: Generic Rev: 1532 Prod: STORAGE DEVICE
                  Type: Removable Hard Disk
                  Capacity: 60906.0 MB = 59.4 GB (124735488 x 512)
                  ... is now current device
                  Failed to mount ext2 filesystem...
                  ** Unrecognized filesystem type **

                  大法师大 1 Reply Last reply Reply Quote 0
                  • M
                    myhexb @大法师
                    last edited by

                    @大法师 硬盘盒子干脆就找不到usb设备 ，

                    大法师大 1 Reply Last reply Reply Quote 0
                    • 大法师大
                      大法师 @myhexb
                      last edited by

                      @myhexb said in Coolpi 4b Ubuntu20.04 原生系统:

                      @大法师 硬盘盒子干脆就找不到usb设备 ，

                      硬盘盒需要更新loader，且需要注意适配器供电功率

                      https://www.cool-pi.com/topic/170/coolpi-4b-loading-from-usb-ssd

                      jack@cool-pi.com

                      M 1 Reply Last reply Reply Quote 0
                      • 大法师大
                        大法师 @myhexb
                        last edited by 大法师

                        @myhexb said in Coolpi 4b Ubuntu20.04 原生系统:

                        @大法师 试了 usb插 硬盘盒子和 读卡器 还是只有京东卡可以启动，闪迪卡可以找到卡 但不能启动 ，重做和换镜像文件都没成功，0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
                        dp@fde50000 disconnected
                        hdmi@fde80000 disconnected
                        Autoboot in 1 seconds
                        trsv ln0 mon rx cdr lock timeout
                        dp@fde50000 disconnected
                        hdmi@fde80000 disconnected
                        starting USB...
                        Bus usb@fc880000: USB EHCI 1.00
                        scanning bus usb@fc880000 for devices... 2 USB Device(s) found
                        scanning usb for storage devices... 1 Storage Device(s) found

                        Device 0: Vendor: Generic Rev: 1532 Prod: STORAGE DEVICE
                        Type: Removable Hard Disk
                        Capacity: 60906.0 MB = 59.4 GB (124735488 x 512)
                        ... is now current device
                        Failed to mount ext2 filesystem...
                        ** Unrecognized filesystem type **

                        能找到卡，不能启动，可能与分区表有关，请参考

                        https://www.cool-pi.com/topic/168/如果制作的启动盘无法加载/3

                        jack@cool-pi.com

                        1 Reply Last reply Reply Quote 0
                        • M
                          myhexb @大法师
                          last edited by

                          @大法师 756b9368-81a2-4668-96ed-ca647f1ff832-image.png
                          找不到设备，数据线也换了两根了 就是读不到，设备管理器也看不到有设备

                          J 1 Reply Last reply Reply Quote 0
                          • J
                            jack_admin @myhexb
                            last edited by jack_admin

                            @myhexb usb线插上面那个蓝色USB端口。另外驱动安装后，重启系统试试

                            M 1 Reply Last reply Reply Quote 0
                            • M
                              myhexb @jack_admin
                              last edited by

                              @jack_admin 都试了 ， 重启 换线 换口 短接MASKROM和地 重装驱动

                              J 1 Reply Last reply Reply Quote 0
                              • J
                                jack_admin @myhexb
                                last edited by

                                @myhexb
                                有些usb数据线是只供电的，不带数据信号。请确认一下

                                M 1 Reply Last reply Reply Quote 0
                                • M
                                  myhexb @jack_admin
                                  last edited by

                                  @jack_admin 试了两根 万用表测4个触点通断也没问题，

                                  G 1 Reply Last reply Reply Quote 0
                                  • G
                                    george @myhexb
                                    last edited by

                                    @myhexb 联系一下代理商，申请售后。

                                    1 Reply Last reply Reply Quote 0
                                    • B
                                      bg8wj
                                      last edited by

                                      新的系统映像能跟新以下 树莓派摄像头和AP+sta的内核码，测试安装了ap+sta 的驱动后摄像头 ov56XX 不工作了。测试Create_ap无法运行，定位到摄像头和wifi 不能同时工作。

                                      J 1 Reply Last reply Reply Quote 0
                                      • J
                                        jack_admin @bg8wj
                                        last edited by

                                        @bg8wj 哪个版本镜像

                                        B 1 Reply Last reply Reply Quote 0
                                        • B
                                          bg8wj @jack_admin
                                          last edited by

                                          @jack_admin ubuntu20.04 20230116的

                                          J 1 Reply Last reply Reply Quote 0
                                          • J
                                            jack_admin @bg8wj
                                            last edited by

                                            @bg8wj
                                            更新到新镜像或使用新内核编译替换

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 3
                                            • 2 / 3
                                            • First post
                                              Last post