• Recent
    • Docs
    • Github
    • 百度网盘
    • Onedrive
    • Official
    • Shop
    • Register
    • Login

    Coolpi 4b Ubuntu20.04 原生系统

    Scheduled Pinned Locked Moved Ubuntu
    41 Posts 10 Posters 4.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      myhexb @大法师
      last edited by

      @大法师 用的官方文件百度网盘ubuntu文件夹里的 20.04桌面版 3.52g的那个

      1 Reply Last reply Reply Quote 0
      • M
        myhexb @大法师
        last edited by

        @大法师 闪迪的卡就像没插卡一样，反复显示 coolpi 京东卡可以进去 但特别卡，而且非正常关机后大概率也会进不去系统，不过一般会卡到 - 界面。需要重新刷机才行

        1 Reply Last reply Reply Quote 0
        • M
          myhexb @george
          last edited by

          @george 嫊-oZp@fde50000 disconnected
          hdmi@fde80000 disconnected
          Autoboot in 1 seconds
          trsv ln0 mon rx cdr lock timeout
          dp@fde50000 disconnected
          hdmi@fde80000 disconnected
          starting USB...
          Bus usb@fc880000: USB EHCI 1.00
          scanning bus usb@fc880000 for devices... 1 USB Device(s) found
          scanning usb for storage devices... 0 Storage Device(s) found

          Device 0: unknown device
          switch to partitions #0, OK
          mmc1 is current device
          Scanning mmc 1:1...
          Found /extlinux/extlinux.conf
          Retrieving file: /extlinux/extlinux.conf
          reading /extlinux/extlinux.conf
          287 bytes read in 8 ms (34.2 KiB/s)
          1: Ubuntu coolpi
          Retrieving file: /initrd.img
          reading /initrd.img
          8775086 bytes read in 709 ms (11.8 MiB/s)
          Retrieving file: /Image
          reading /Image
          37294592 bytes read in 2992 ms (11.9 MiB/s)
          append: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,115200n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:52:84:fe:01:16:93
          Retrieving file: /rk3588s-cp4.dtb
          reading /rk3588s-cp4.dtb
          141784 bytes read in 18 ms (7.5 MiB/s)

          Flattened Device Tree blob at 0x0a100000

          Booting using the fdt blob at 0x0a100000
          Loading Ramdisk to eb176000, end eb9d45ae ... OK
          Loading Device Tree to 00000000eb150000, end 00000000eb1759d7 ... OK
          Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
          Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
          Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
          Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000)

          Starting kernel ...

          I/TC: Secondary CPU 4 initializing
          I/TC: Secondary CPU 4 switching to normal world boot
          I/TC: Secondary CPU 5 initializing
          I/TC: Secondary CPU 5 switching to normal world boot
          I/TC: Secondary CPU 6 initializing
          I/TC: Secondary CPU 6 switching to normal world boot
          I/TC: Secondary CPU 7 initializing
          I/TC: Secondary CPU 7 switching to normal world boot
          I/TC: Secondary CPU 1 initializing
          I/TC: Secondary CPU 1 switching to normal world boot
          I/TC: Secondary CPU 2 initializing
          I/TC: Secondary CPU 2 switching to normal world boot
          I/TC: Secondary CPU 3 initializing
          I/TC: Secondary CPU 3 switching to normal world boot
          [ 8.386768] rk-pcie fe190000.pcie: IRQ msi not found
          [ 8.386784] rk-pcie fe190000.pcie: Missing config reg space
          [ 8.386875] rk-pcie fe190000.pcie: Missing config reg space
          [ 8.386902] rk-pcie fe190000.pcie: invalid resource
          [ 8.389687] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
          [ 8.390791] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
          [ 8.390796] rkvdec2_init:1010: No niu aclk reset resource define
          [ 8.390799] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
          [ 8.390802] rkvdec2_init:1013: No niu hclk reset resource define
          [ 8.391320] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
          [ 8.391324] rkvdec2_init:1010: No niu aclk reset resource define
          [ 8.391327] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
          [ 8.391330] rkvdec2_init:1013: No niu hclk reset resource define
          [ 8.393004] mpp_iommu_probe:434: failed to get device node
          [ 8.393008] mpp_av1dec av1d-master: failed to attach iommu
          [ 8.517456] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
          [ 8.525303] rockchip-drm display-subsystem: failed to show kernel logo
          [ 8.704582] rk806 spi2.0: no sleep-setting state
          [ 8.709201] rk806 spi2.0: no reset-setting pinctrl state
          [ 8.714503] rk806 spi2.0: no dvs-setting pinctrl state
          [ 8.926386] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
          [ 8.933738] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
          [ 8.941087] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
          [ 8.948434] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
          [ 8.955782] tinker-mcu: send_cmds: send command failed, ret = -6, retry again!
          [ 8.962994] tinker-mcu: send_cmds: send command failed
          [ 8.968123] tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
          [ 9.539506] tinker-ft5406: tinker_ft5406_probe: wait connected timeout
          [ 9.620266] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
          [ 9.630200] debugfs: File 'Capture' in directory 'dapm' already present!
          [ 9.652203] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
          [ 9.851268] ov5647 8-0036: Unsupported clock frequency: 24000000
          [ 9.991259] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
          [ 9.998472] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
          [ 10.005768] debugfs: File 'HPCP L' in directory 'dapm' already present!
          [ 10.012367] debugfs: File 'HPCP R' in directory 'dapm' already present!
          [ 10.018969] debugfs: File 'HPVOL L' in directory 'dapm' already present!
          [ 10.025654] debugfs: File 'HPVOL R' in directory 'dapm' already present!
          [ 10.034611] rockchip_headset rk-headset: Can not read property headset_gpio
          [ 10.042867] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
          [ 10.051384] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
          [ 10.059894] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
          [ 10.072022] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
          [ 10.100903] RKNPU fdab0000.npu: failed to find power_model node
          [ 10.106814] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
          [ 10.113414] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
          Gave up waiting for root file system device. Common problems:

          • Boot args (cat /proc/cmdline)
            • Check rootdelay= (did the system wait long enough?)
          • Missing modules (cat /proc/modules; ls /dev)
            ALERT! LABEL=writable does not exist. Dropping to a shell!

          BusyBox v1.30.1 (Ubuntu 1:1.30.1-7ubuntu3) built-in shell (ash)
          Enter 'help' for a list of built-in commands.

          (initramfs) 

          G 1 Reply Last reply Reply Quote 0
          • M
            myhexb @george
            last edited by

            @george DDR V1.09 a930779e06 typ 22/11/21-17:50:56
            LPDDR4X, 2112MHz
            channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 D镈DR V1.09 a930779e06 typ 22/11/21-17:50:56
            LPDDR4X, 2112MHz
            channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            Manufacturer ID:0xff
            CH0 RX Vref:29.7%, TX Vref:21.8%,21.8%
            CH1 RX Vref:30.7%, TX Vref:21.8%,22.8%
            CH2 RX Vref:30.7%, TX Vref:20.8%,20.8%
            CH3 RX Vref:29.7%, TX Vref:22.8%,22.8%
            change to F1: 528MHz
            change to F2: 1068MHz
            change to F3: 1560MHz
            change to F0: 2112MHz
            out
            INFO: Preloader serial: 2
            NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
            NOTICE: BL31: Built : 16:20:07, Dec 7 2022
            INFO: spec: 0x13
            INFO: ext 32k is not valid
            INFO: ddr: stride-en 4CH
            INFO: GICv3 without legacy support detected.
            INFO: ARM GICv3 driver initialized in EL3
            INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
            INFO: system boots from cpu-hwid-0
            INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
            INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
            INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
            INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
            INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
            INFO: BL31: Initialising Exception Handling Framework
            INFO: BL31: Initializing runtime services
            INFO: BL31: Initializing BL32
            INFO: hdmirx_handler: dma not on, ret
            I/TC:
            I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022骞?09鏈?20鏃?鏄熸湡浜?09:41:09 CST aarch64
            I/TC: Primary CPU initializing
            I/TC: Primary CPU switching to normal world boot
            INFO: BL31: Preparing for EL3 exit to normal world
            INFO: Entry point address = 0x200000
            INFO: SPSR = 0x3c9

            COOLPI LOADER BY YANYI(Jan 04 2023)

            DRAM: 8 GiB
            Using default environment

            0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
            dp@fde50000 disconnected
            hdmi@fde80000 disconnected
            Autoboot in 1 seconds
            trsv ln0 mon rx cdr lock timeout
            dp@fde50000 disconnected
            hdmi@fde80000 disconnected
            starting USB...
            Bus usb@fc880000: USB EHCI 1.00
            scanning bus usb@fc880000 for devices... 1 USB Device(s) found
            scanning usb for storage devices... 0 Storage Device(s) found

            Device 0: unknown device
            switch to partitions #0, OK
            mmc1 is current device
            Failed to mount ext2 filesystem...
            ** Unrecognized filesystem type **
            Card did not respond to voltage select!
            mmc_init: -95, time 17
            Loading order: usb - tf - emmc
            bank id invalid
            request for 141 failed:-22
            bank id invalid
            request for 141 failed:-22
            resetting USB...
            Bus usb@fc880000: USB EHCI 1.00
            scanning bus usb@fc880000 for devices... 1 USB Device(s) found
            scanning usb for storage devices... 0 Storage Device(s) found
            ** Bad device usb 0 **
            ** Bad device usb 0 **
            switch to partitions #0, OK
            mmc1 is current device
            Failed to mount ext2 filesystem...
            ** Unrecognized filesystem type **
            Failed to mount ext2 filesystem...
            ** Unrecognized filesystem type **
            Card did not respond to voltage select!
            mmc_init: -95, time 16
            Card did not respond to voltage select!
            mmc_init: -95, time 16
            ** Bad device mmc 0 **
            Card did not respond to voltage select!
            mmc_init: -95, time 17
            ** Bad device mmc 0 **
            DDR V1.09 a930779e06 typ 22/11/21-17:50:56
            LPDDR4X, 2112MHz
            channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
            Manufacturer ID:0xff
            CH0 RX Vref:30.7%, TX Vref:21.8%,21.8%
            CH1 RX Vref:30.7%, TX Vref:22.8%,21.8%
            CH2 RX Vref:30.7%, TX Vref:20.8%,20.8%
            CH3 RX Vref:30.7%, TX Vref:22.8%,22.8%
            change to F1: 528MHz
            change to F2: 1068MHz
            change to F3: 1560MHz
            change to F0: 2112MHz
            out
            INFO: Preloader serial: 2
            NOTICE: BL31: v2.3():v2.3-481-g17b41886e:derrick.huang
            NOTICE: BL31: Built : 16:20:07, Dec 7 2022
            INFO: spec: 0x13
            INFO: ext 32k is valid
            INFO: ddr: stride-en 4CH
            INFO: GICv3 without legacy support detected.
            INFO: ARM GICv3 driver initialized in EL3
            INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
            INFO: system boots from cpu-hwid-0
            INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
            INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
            INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
            INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
            INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
            INFO: BL31: Initialising Exception Handling Framework
            INFO: BL31: Initializing runtime services
            INFO: BL31: Initializing BL32
            INFO: hdmirx_handler: dma not on, ret
            I/TC:
            I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022骞?09鏈?20鏃?鏄熸湡浜?09:41:09 CST aarch64
            I/TC: Primary CPU initializing
            I/TC: Primary CPU switching to normal world boot
            INFO: BL31: Preparing for EL3 exit to normal world
            INFO: Entry point address = 0x200000
            INFO: SPSR = 0x3c9

            COOLPI LOADER BY YANYI(Jan 04 2023)

            DRAM: 8 GiB
            Using default environment

            0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
            dp@fde50000 disconnected
            hdmi@fde80000 disconnected
            Autoboot in 1 seconds
            trsv ln0 mon rx cdr lock timeout
            dp@fde50000 disconnected
            hdmi@fde80000 disconnected
            starting USB...
            Bus usb@fc880000: USB EHCI 1.00
            scanning bus usb@fc880000 for devices... 1 USB Device(s) found
            scanning usb for storage devices... 0 Storage Device(s) found

            Device 0: unknown device
            switch to partitions #0, OK
            mmc1 is current device
            Failed to mount ext2 filesystem...
            ** Unrecognized filesystem type **
            Card did not respond to voltage select!
            mmc_init: -95, time 17
            Loading order: usb - tf - emmc
            bank id invalid
            request for 141 failed:-22
            bank id invalid
            request for 141 failed:-22
            resetting USB...
            Bus usb@fc880000: USB EHCI 1.00
            scanning bus usb@fc880000 for devices...

            这个是完全启动 不起来的日志

            1 Reply Last reply Reply Quote 0
            • G
              george @myhexb
              last edited by

              @myhexb 这个是镜像没有制作成功。如果有读卡器可以先格式化一次卡，然后再制作，闪迪的卡我一直在用，没有什么问题。

              M 1 Reply Last reply Reply Quote 0
              • M
                myhexb @george
                last edited by

                @george 第一张闪迪卡各种方式格式化 试了4 5次了 ，第二张也试了一次 还是不行

                G 1 Reply Last reply Reply Quote 0
                • G
                  george @myhexb
                  last edited by

                  @myhexb 可以换个镜像再测试。从log看的情况就是卡没有识别到或者rootfs没有成功挂载。

                  M 1 Reply Last reply Reply Quote 0
                  • M
                    myhexb @george
                    last edited by

                    @george 换22.04 也还是一样的情况

                    大法师大 1 Reply Last reply Reply Quote 0
                    • 大法师大
                      大法师 @myhexb
                      last edited by

                      @myhexb 用读卡器连接，插在USB3下层端口，启动试试

                      jack@cool-pi.com

                      M 2 Replies Last reply Reply Quote 0
                      • M
                        myhexb @大法师
                        last edited by

                        @大法师 试了 usb插 硬盘盒子和 读卡器 还是只有京东卡可以启动，闪迪卡可以找到卡 但不能启动 ，重做和换镜像文件都没成功，0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
                        dp@fde50000 disconnected
                        hdmi@fde80000 disconnected
                        Autoboot in 1 seconds
                        trsv ln0 mon rx cdr lock timeout
                        dp@fde50000 disconnected
                        hdmi@fde80000 disconnected
                        starting USB...
                        Bus usb@fc880000: USB EHCI 1.00
                        scanning bus usb@fc880000 for devices... 2 USB Device(s) found
                        scanning usb for storage devices... 1 Storage Device(s) found

                        Device 0: Vendor: Generic Rev: 1532 Prod: STORAGE DEVICE
                        Type: Removable Hard Disk
                        Capacity: 60906.0 MB = 59.4 GB (124735488 x 512)
                        ... is now current device
                        Failed to mount ext2 filesystem...
                        ** Unrecognized filesystem type **

                        大法师大 1 Reply Last reply Reply Quote 0
                        • M
                          myhexb @大法师
                          last edited by

                          @大法师 硬盘盒子干脆就找不到usb设备 ，

                          大法师大 1 Reply Last reply Reply Quote 0
                          • 大法师大
                            大法师 @myhexb
                            last edited by

                            @myhexb said in Coolpi 4b Ubuntu20.04 原生系统:

                            @大法师 硬盘盒子干脆就找不到usb设备 ，

                            硬盘盒需要更新loader，且需要注意适配器供电功率

                            https://www.cool-pi.com/topic/170/coolpi-4b-loading-from-usb-ssd

                            jack@cool-pi.com

                            M 1 Reply Last reply Reply Quote 0
                            • 大法师大
                              大法师 @myhexb
                              last edited by 大法师

                              @myhexb said in Coolpi 4b Ubuntu20.04 原生系统:

                              @大法师 试了 usb插 硬盘盒子和 读卡器 还是只有京东卡可以启动，闪迪卡可以找到卡 但不能启动 ，重做和换镜像文件都没成功，0 2 1 3 6 8 7 9 trsv ln0 mon rx cdr lock timeout
                              dp@fde50000 disconnected
                              hdmi@fde80000 disconnected
                              Autoboot in 1 seconds
                              trsv ln0 mon rx cdr lock timeout
                              dp@fde50000 disconnected
                              hdmi@fde80000 disconnected
                              starting USB...
                              Bus usb@fc880000: USB EHCI 1.00
                              scanning bus usb@fc880000 for devices... 2 USB Device(s) found
                              scanning usb for storage devices... 1 Storage Device(s) found

                              Device 0: Vendor: Generic Rev: 1532 Prod: STORAGE DEVICE
                              Type: Removable Hard Disk
                              Capacity: 60906.0 MB = 59.4 GB (124735488 x 512)
                              ... is now current device
                              Failed to mount ext2 filesystem...
                              ** Unrecognized filesystem type **

                              能找到卡，不能启动，可能与分区表有关，请参考

                              https://www.cool-pi.com/topic/168/如果制作的启动盘无法加载/3

                              jack@cool-pi.com

                              1 Reply Last reply Reply Quote 0
                              • M
                                myhexb @大法师
                                last edited by

                                @大法师 756b9368-81a2-4668-96ed-ca647f1ff832-image.png
                                找不到设备，数据线也换了两根了 就是读不到，设备管理器也看不到有设备

                                J 1 Reply Last reply Reply Quote 0
                                • J
                                  jack_admin @myhexb
                                  last edited by jack_admin

                                  @myhexb usb线插上面那个蓝色USB端口。另外驱动安装后，重启系统试试

                                  M 1 Reply Last reply Reply Quote 0
                                  • M
                                    myhexb @jack_admin
                                    last edited by

                                    @jack_admin 都试了 ， 重启 换线 换口 短接MASKROM和地 重装驱动

                                    J 1 Reply Last reply Reply Quote 0
                                    • J
                                      jack_admin @myhexb
                                      last edited by

                                      @myhexb
                                      有些usb数据线是只供电的，不带数据信号。请确认一下

                                      M 1 Reply Last reply Reply Quote 0
                                      • M
                                        myhexb @jack_admin
                                        last edited by

                                        @jack_admin 试了两根 万用表测4个触点通断也没问题，

                                        G 1 Reply Last reply Reply Quote 0
                                        • G
                                          george @myhexb
                                          last edited by

                                          @myhexb 联系一下代理商，申请售后。

                                          1 Reply Last reply Reply Quote 0
                                          • B
                                            bg8wj
                                            last edited by

                                            新的系统映像能跟新以下 树莓派摄像头和AP+sta的内核码，测试安装了ap+sta 的驱动后摄像头 ov56XX 不工作了。测试Create_ap无法运行，定位到摄像头和wifi 不能同时工作。

                                            J 1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 3
                                            • 2 / 3
                                            • First post
                                              Last post