@anernest
This product is designed for enthusiasts and is very suitable for DIY users to develop, assemble, and build their own. Currently, after dismantling the machine, they do not enjoy after-sales policies. However, various accessories of the machine, including motherboards, core board and shell materials, can be sold separately for secondary sales. And we have a dedicated team to assist users in solving various problems in use and design. Notebook products are an extension of the CM5 core board, and currently there is no separate theme in the community. If you have any questions, you can directly post them under the CM5 theme. Thank you for your support.

The latest laptop motherboard design has changed the WiFi section to a standard M2 interface, making it easy for users to replace according to different needs. Early machines can also be upgraded by replacing the motherboard.
7491a67a-d56e-492a-82ed-cef57f5b6414-image.png
e84ff128-7df5-44c6-881f-3a66caa8add3-image.png
7680b502-268b-4213-a05e-07da54eae409-image.png

@LinuxRk3588
1.CM5-EVB的typec接口只有供电功能，没有USB和DP功能。
2.调试接口可以使用TTL或者网口，这个底板的原理图和PCB文件在wiki可以下载。图纸上有完整的信号定义。
3.SATA电源是标准的12V 5V设计，丝印上也有标注。
4.上层的USB3.0接口是OTG接口，可以软件配置HOST或者DEVICE功能，其它USB接口都是HOST。

@jugg 手动或自动，你可以评估选择。分区必须要有才能挂载

@qys2022 没有反。

@大法师Thanks for your reply. Have a great weekend

@george 好的，谢谢啦，主要担心影响系统，导致ubuntu启动过程出问题。

@大法师 是arm64的

@george 进不去网页

@hassan_cheng 可以支持深度休眠唤醒，CM5 核心板休眠功耗5V/3MA左右。WIFI暂时不支持深度休眠唤醒。

@lrx 是有什么需求，需要改动uboot？

@jack_admin 好了👍 👍 👍 ，谢谢各位

@Jachyn 完整log，不要猜哈

@dff 可以通过MIPI-RX接口链接MIPI相机。

@SSHLY 这个是PADS格式的。不是AD.

@jugg 这个只需要替换内核就可以了。跟之前其它FS的方法是一样的。

@blank Official document description: The pcie30x4 controller operates in EP mode and can be used in 4Lane mode or 2Lane mode using pcie30phy's port0. The 2lane in pcie30phy's port1 can be used as an RC in conjunction with other controllers.

The SSD of the CM5 machine corresponds to the PCIE30 PORT0 interface

@wuming U盘安装系统？接hdmi显示器看看，默认是输出到显示屏