Firefox deb version freezed when try to play video
-
@plumlis
Firefox defaults to calling ffmpeg decoding, and we have added hardware decoding support for rkmpp to the local ffmpeg. So you just need to update the ffmpeg version to the standard version published on the official website. -
@george I disabled hardware acceleration and everything works fine now.
Also some display issue while scrolling is solved.
-
Will this issue being fixed in Kernel 6.1 and new version mesa?
-
@plumlis
Provide a basic image, the system can start normally, WIFI is working properly, and support for GPU and VPU has not been added yet.
-
@george nice, I'll gave it a try.
thank you.
-
Someday we will be able to use mainline kernel.
-
@mainbord
Coolpi4b and cm5 evb currently support mainline kernels above 6.8, but laptops do not support mainline kernels due to eDP display drivers. So it will be a little later. Currently undergoing debugging. Looking forward to the next main version being released. Thank you for your support. -
@george
May be you can add build recipe here, it will be a good advertise
https://github.com/manjaro-arm -
Actully not only video playing decode issue.
But also some display area shutter issue while scrolling.
Disable GPU accelaration. everthing looks fine now.Will this be solved in kernel 6.1 BSP?
How is the status of kernel 6.1 now? When will we see it?I tried to compile kernel by myself ftom cool pi github 6.1 stan rkr1 branch but failed.
blog: https://plumz.me
-
Is it safe to install newer version mesa?
I saw that new version mesa have many panfrost related fixes. -
@plumlis
The kernel version 6.1 will support it and is currently being adapted. -
@george okay. hope kernel 6.1 will release soon.
And thanks for your hard work.
-
Hey George. Could you have some USB Disk brands recomand to use as Boot drive?
I tried many Sandisk 3.0 and all of them don't work. Only one 16GB USB(No brand) disk can boot up. But it can't be use as fedora image( It's 17GB )
-
@plumlis
Let me briefly introduce the current situation of the NAND flash industry. The best A-class die is used as a high-capacity and high-value storage device for first tier brands such as SSDs and EMMCs. The worse one is used for second tier brands such as EMMCs and NAND FLASH, and the worse one is used for a large number of bad fast devices. The 8GB capacity can be reduced to 4G or 2G for USB drives or T cards. There is even worse junk die, which will appear on the T card that costs a few yuan on Mouduoduo. So if doing system mirroring, it is recommended to use SSD or SATA portable hard drives, as both performance and reliability are the best. -
@george I knew that.
But the point is I can't find a usb stick to make this fedora image boot up.
Wiki said only usb 2.0 disk can be boot up.I tested all my usb 3.0/2.0 devices. Only one usb 2.0 stick can be booted. But it's 16GB, fedora image is 17GB and can't write to it.
I just asked you to recommand a usb device can be boot up.
-
@plumlis
Suggest updating uboot to the latest version and then trying USB BOOT. The latest development branch has been optimized for some USB drives. Of course, you can also write images to EMMC through UMS. -
@george It seems I have to compile boot loader first?
https://cool-pi.com/topic/380/cool-pi-4b-cm5-linux-system-support-compile-u-boot
Following this guide.
Ubuntu 24.04 don't have python2, can't compile directly, annoying
-
sudo ln -s /usr/bin/python3.12 /usr/bin/python -
Already did. Seems it doesn't work.
$./build-uboot.sh cm5-notebook ## make rk3588_coolpicm5_notebook_defconfig -j16 # # configuration written to .config # scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep CFG spl/u-boot.cfg CFG tpl/u-boot.cfg GEN spl/include/autoconf.mk GEN include/autoconf.mk GEN tpl/include/autoconf.mk CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h UPD include/generated/timestamp_autogenerated.h CHK include/config.h CFG u-boot.cfg CHK include/generated/version_autogenerated.h CHK include/generated/generic-asm-offsets.h CHK include/generated/asm-offsets.h HOSTCC tools/mkenvimage.o HOSTCC tools/fit_image.o HOSTCC tools/image-host.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o HOSTCC tools/rockchip/boot_merger.o HOSTCC tools/rockchip/loaderimage.o HOSTLD tools/loaderimage tools/rockchip/boot_merger.c: In function ‘mergeBoot’: tools/rockchip/boot_merger.c:700:43: warning: ‘%s’ directive output may be truncated writing up to 813 bytes into a region of size 5 [-Wformat-truncation=] 700 | snprintf(buffer, sizeof(buffer), "%s", chip); | ^~ ...... 742 | chipType = convertChipType(chip + 2); | ~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:980, from ././include/compiler.h:25, from <command-line>: In function ‘snprintf’, inlined from ‘convertChipType’ at tools/rockchip/boot_merger.c:700:2, inlined from ‘getChipType’ at tools/rockchip/boot_merger.c:742:14, inlined from ‘getBoothdr’ at tools/rockchip/boot_merger.c:761:18, inlined from ‘mergeBoot’ at tools/rockchip/boot_merger.c:830:2: /usr/include/aarch64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin_snprintf’ output between 1 and 814 bytes into a destination of size 5 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ In function ‘wide2str’, inlined from ‘unpackBoot’ at tools/rockchip/boot_merger.c:955:3, inlined from ‘main’ at tools/rockchip/boot_merger.c:1072:8: tools/rockchip/boot_merger.c:895:18: warning: array subscript 20 is outside array bounds of ‘char[20]’ [-Warray-bounds=] 895 | str[len] = 0; | ~~~~~~~~~^~~ tools/rockchip/boot_merger.c: In function ‘main’: tools/rockchip/boot_merger.c:933:14: note: at offset 20 into object ‘name’ of size 20 933 | char name[MAX_NAME_LEN]; | ^~~~ HOSTLD tools/boot_merger HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/mkimage CC arch/arm/cpu/armv8/fwcall.o CC common/main.o LD arch/arm/cpu/armv8/built-in.o CC cmd/version.o LD common/built-in.o CC lib/display_options.o LD cmd/built-in.o LD lib/built-in.o LD u-boot /usr/bin/aarch64-linux-gnu-ld.bfd: warning: u-boot has a LOAD segment with RWX permissions OBJCOPY u-boot.srec OBJCOPY u-boot-nodtb.bin SYM u-boot.sym make[2]: 'arch/arm/dts/rk3588-cp5-x8.dtb' is up to date. COPY u-boot.dtb start=$(/usr/bin/aarch64-linux-gnu-nm u-boot | grep __rel_dyn_start | cut -f 1 -d ' '); end=$(/usr/bin/aarch64-linux-gnu-nm u-boot | grep __rel_dyn_end | cut -f 1 -d ' '); tools/relocate-rela u-boot-nodtb.bin 0x00200000 $start $end CAT u-boot-dtb.bin MKIMAGE u-boot.img MKIMAGE u-boot-dtb.img COPY u-boot-dtb-kern.bin ALIGN u-boot-dtb-kern.bin CAT u-boot.bin CC spl/common/spl/spl.o CC spl/arch/arm/cpu/armv8/fwcall.o COPY spl/u-boot-spl.dtb CC tpl/arch/arm/cpu/armv8/fwcall.o LD spl/arch/arm/cpu/armv8/built-in.o CC tpl/arch/arm/mach-rockchip/tpl.o LD tpl/arch/arm/cpu/armv8/built-in.o CC spl/lib/display_options.o LD tpl/arch/arm/mach-rockchip/built-in.o LD spl/common/spl/built-in.o LD spl/lib/built-in.o LD tpl/u-boot-tpl /usr/bin/aarch64-linux-gnu-ld.bfd: warning: u-boot-tpl has a LOAD segment with RWX permissions OBJCOPY tpl/u-boot-tpl-nodtb.bin COPY tpl/u-boot-tpl.bin LD spl/u-boot-spl /usr/bin/aarch64-linux-gnu-ld.bfd: warning: u-boot-spl has a LOAD segment with RWX permissions OBJCOPY spl/u-boot-spl-nodtb.bin CAT spl/u-boot-spl-dtb.bin COPY spl/u-boot-spl.bin CFGCHK u-boot.cfg ERROR: No python2 $ python Python 3.12.3 (main, Apr 10 2024, 05:33:47) [GCC 13.2.0] on linux Type "help", "copyright", "credits" or "license" for more information. >>> -
@plumlis
The following is what I have compiled and can be used directly.
RKDevTool_v3.13_for_window.rar
