I rebuild the Kernel and upgraded it, seems that it doesn't support Wireguard or openvpn

@george did that, but these are the same files i already have on the machine, so there must be an issue with the repository

modprobe cant start openvpn or wireguard? Seems there are kernel-headers missing

@George The latest Ubuntu image won't boot from either a usb stick nor if its imaged onto the laptop from my Macbook using ums mode,
both Debian and Arabian boot fine.

@george i also flashed the image to the emmc of the laptop, ubuntu didnt boot there either, meanwhile i tried the armbian image, that booted too.

@george i can confirm that the debian image boots normally,, only the latest Ubuntu wont start.

@George what when its not booting from usb either?

I tried flashing the latest image to my laptop, but after rebooting, nothing comes up after the coolpi logo, the backlight is on but nothing else. anything i can try?

is the 3.5 ich headphone jack both an out and input?

@Momo-0

Re: Latest Jammy update breaks hardware acceleration

Seems like hardware acceleration using the mali is broken again

@plumlis it was an oem model I took from a damaged laptop, I also had issues with other oem nvmes I scavenged and used them in external enclosures on macOS, so I suspect ssds delivered to Laptop manufacturers have some kinda special firmwares, both times a new ssd worked without issues. my guess is any WD ssd can buy as a consumer will work.

usb-c charging doesnt seem to be working correctly for me. I've tried with a Macbook Charger and through a usb-c dock and while the icon shows the battery charging, it actually looses power.

Can we upgrade 22.04 by editing the sources?

@george i also have ubuntu showing two realtek wlan devices, maybe thats a clue to something?

Also i compiled for V20 since i replaced the motherboard

@george i cleaned the contacts on the wlan card and the main processor card, still the usb bluetooth card doesnt show up maybe the board is faulty?

@george lspci.txt lsusb.txt

I replaced the board in my laptop with the newer one and compiled the firmware, but now i have two wlan adapters showing and no bluetooth available.

@george it says it cant be shipped to my location?

Is there a Possibility of getting this new board shipped to Germany?