@jack_admin @大法师 现在支持HQ Camera了吗

@大法师 先支持HQ Camera吧，视觉应用是大头

@ccjjww1222 V11版本是板载天线。V10是外置天线，你的是哪个版本

@大法师 建议尽快支持一下树莓派的HQ Camera，传感器型号是IMX477R，现在这款摄像头很火，可以匹配各种不同的镜头。IMX708支持自动对焦，是新出的产品。

可以通过了，就因为文件路径存在空格

@大法师 是权限问题，修改/media/coolpi文件夹的用户为coolpi就可以了

@jack_admin 已经成功

@george 试了不能用

gst-launch-1.0 v4l2src device=/dev/video11 ! image/jpeg, width=1920, height=1080, framerate=25/1 ! jpegparse ! mppjpegdec ! kmssink plane-id=88
Setting pipeline to PAUSED ...
ERROR: from element /GstPipeline:pipeline0/GstKMSSink:kmssink0: Could not get allowed GstCaps of device
Additional debug info:
../sys/kms/gstkmssink.c(1183): gst_kms_sink_start (): /GstPipeline:pipeline0/GstKMSSink:kmssink0:
driver does not provide mode settings configuration
ERROR: pipeline doesn't want to preroll.
ERROR: from element /GstPipeline:pipeline0/GstKMSSink:kmssink0: GStreamer error: state change failed and some element failed to post a proper error message with the reason for the failure.
Additional debug info:
../libs/gst/base/gstbasesink.c(5878): gst_base_sink_change_state (): /GstPipeline:pipeline0/GstKMSSink:kmssink0:
Failed to start
ERROR: pipeline doesn't want to preroll.
Failed to set pipeline to PAUSED.
Setting pipeline to NULL ...
Freeing pipeline ...

@george fc2f87b3-499a-4776-870a-a2561f6f19d9-image.png

原因找到了，是configuration 那里要设置选择HFP

@jack_admin 那就没有问题了，只要优先从tf卡启动就行，我已经通过tf卡启动ubuntu22.04，然后通过dd命令将img写入到emmc中，并且启动成功。这样就再也不用把emmc从板子上取下来了，yeah！谢谢

@xingzhan2012 可以用cool pi ubuntu系统，直接dd 刷系统到其他存储介质，比如emmc