Firefox deb version freezed when try to play video

plumlis

@george I knew that.
But the point is I can't find a usb stick to make this fedora image boot up.
Wiki said only usb 2.0 disk can be boot up.

I tested all my usb 3.0/2.0 devices. Only one usb 2.0 stick can be booted. But it's 16GB, fedora image is 17GB and can't write to it.

I just asked you to recommand a usb device can be boot up.

george

@plumlis
Suggest updating uboot to the latest version and then trying USB BOOT. The latest development branch has been optimized for some USB drives. Of course, you can also write images to EMMC through UMS.

plumlis

@george It seems I have to compile boot loader first?

https://cool-pi.com/topic/380/cool-pi-4b-cm5-linux-system-support-compile-u-boot

Following this guide.

Ubuntu 24.04 don't have python2, can't compile directly, annoying

george

@plumlis

sudo ln -s /usr/bin/python3.12 /usr/bin/python

plumlis

@george

Already did. Seems it doesn't work.

$./build-uboot.sh cm5-notebook

## make rk3588_coolpicm5_notebook_defconfig -j16
#
# configuration written to .config
#
scripts/kconfig/conf  --silentoldconfig Kconfig
  CHK     include/config.h
  CFG     u-boot.cfg
  GEN     include/autoconf.mk.dep
  CFG     spl/u-boot.cfg
  CFG     tpl/u-boot.cfg
  GEN     spl/include/autoconf.mk
  GEN     include/autoconf.mk
  GEN     tpl/include/autoconf.mk
  CHK     include/config/uboot.release
  CHK     include/generated/timestamp_autogenerated.h
  UPD     include/generated/timestamp_autogenerated.h
  CHK     include/config.h
  CFG     u-boot.cfg
  CHK     include/generated/version_autogenerated.h
  CHK     include/generated/generic-asm-offsets.h
  CHK     include/generated/asm-offsets.h
  HOSTCC  tools/mkenvimage.o
  HOSTCC  tools/fit_image.o
  HOSTCC  tools/image-host.o
  HOSTCC  tools/dumpimage.o
  HOSTCC  tools/mkimage.o
  HOSTCC  tools/rockchip/boot_merger.o
  HOSTCC  tools/rockchip/loaderimage.o
  HOSTLD  tools/loaderimage
tools/rockchip/boot_merger.c: In function ‘mergeBoot’:
tools/rockchip/boot_merger.c:700:43: warning: ‘%s’ directive output may be truncated writing up to 813 bytes into a region of size 5 [-Wformat-truncation=]
  700 |         snprintf(buffer, sizeof(buffer), "%s", chip);
      |                                           ^~
......
  742 |                 chipType = convertChipType(chip + 2);
      |                            ~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:980,
                 from ././include/compiler.h:25,
                 from <command-line>:
In function ‘snprintf’,
    inlined from ‘convertChipType’ at tools/rockchip/boot_merger.c:700:2,
    inlined from ‘getChipType’ at tools/rockchip/boot_merger.c:742:14,
    inlined from ‘getBoothdr’ at tools/rockchip/boot_merger.c:761:18,
    inlined from ‘mergeBoot’ at tools/rockchip/boot_merger.c:830:2:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin_snprintf’ output between 1 and 814 bytes into a destination of size 5
   54 |   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   55 |                                    __glibc_objsize (__s), __fmt,
      |                                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   56 |                                    __va_arg_pack ());
      |                                    ~~~~~~~~~~~~~~~~~
In function ‘wide2str’,
    inlined from ‘unpackBoot’ at tools/rockchip/boot_merger.c:955:3,
    inlined from ‘main’ at tools/rockchip/boot_merger.c:1072:8:
tools/rockchip/boot_merger.c:895:18: warning: array subscript 20 is outside array bounds of ‘char[20]’ [-Warray-bounds=]
  895 |         str[len] = 0;
      |         ~~~~~~~~~^~~
tools/rockchip/boot_merger.c: In function ‘main’:
tools/rockchip/boot_merger.c:933:14: note: at offset 20 into object ‘name’ of size 20
  933 |         char name[MAX_NAME_LEN];
      |              ^~~~
  HOSTLD  tools/boot_merger
  HOSTLD  tools/mkenvimage
  HOSTLD  tools/dumpimage
  HOSTLD  tools/mkimage
  CC      arch/arm/cpu/armv8/fwcall.o
  CC      common/main.o
  LD      arch/arm/cpu/armv8/built-in.o
  CC      cmd/version.o
  LD      common/built-in.o
  CC      lib/display_options.o
  LD      cmd/built-in.o
  LD      lib/built-in.o
  LD      u-boot
/usr/bin/aarch64-linux-gnu-ld.bfd: warning: u-boot has a LOAD segment with RWX permissions
  OBJCOPY u-boot.srec
  OBJCOPY u-boot-nodtb.bin
  SYM     u-boot.sym
make[2]: 'arch/arm/dts/rk3588-cp5-x8.dtb' is up to date.
  COPY    u-boot.dtb
start=$(/usr/bin/aarch64-linux-gnu-nm u-boot | grep __rel_dyn_start | cut -f 1 -d ' '); end=$(/usr/bin/aarch64-linux-gnu-nm u-boot | grep __rel_dyn_end | cut -f 1 -d ' '); tools/relocate-rela u-boot-nodtb.bin 0x00200000 $start $end
  CAT     u-boot-dtb.bin
  MKIMAGE u-boot.img
  MKIMAGE u-boot-dtb.img
  COPY    u-boot-dtb-kern.bin
  ALIGN   u-boot-dtb-kern.bin
  CAT     u-boot.bin
  CC      spl/common/spl/spl.o
  CC      spl/arch/arm/cpu/armv8/fwcall.o
  COPY    spl/u-boot-spl.dtb
  CC      tpl/arch/arm/cpu/armv8/fwcall.o
  LD      spl/arch/arm/cpu/armv8/built-in.o
  CC      tpl/arch/arm/mach-rockchip/tpl.o
  LD      tpl/arch/arm/cpu/armv8/built-in.o
  CC      spl/lib/display_options.o
  LD      tpl/arch/arm/mach-rockchip/built-in.o
  LD      spl/common/spl/built-in.o
  LD      spl/lib/built-in.o
  LD      tpl/u-boot-tpl
/usr/bin/aarch64-linux-gnu-ld.bfd: warning: u-boot-tpl has a LOAD segment with RWX permissions
  OBJCOPY tpl/u-boot-tpl-nodtb.bin
  COPY    tpl/u-boot-tpl.bin
  LD      spl/u-boot-spl
/usr/bin/aarch64-linux-gnu-ld.bfd: warning: u-boot-spl has a LOAD segment with RWX permissions
  OBJCOPY spl/u-boot-spl-nodtb.bin
  CAT     spl/u-boot-spl-dtb.bin
  COPY    spl/u-boot-spl.bin
  CFGCHK  u-boot.cfg
ERROR: No python2

$ python
Python 3.12.3 (main, Apr 10 2024, 05:33:47) [GCC 13.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>

george

@plumlis
The following is what I have compiled and can be used directly.
RKDevTool_v3.13_for_window.rar

plumlis

@george thanks.
The only way to upgrade uboot is following this guide?

https://forum.cool-pi.com/topic/162/how-to-upgrade-the-boot-loader-of-coolpi-4b

short two pins and conect to PC to upgrade loader?

george

This post is deleted!

george

@plumlis
Follow the steps below to operate:
1.USB cable for TYPEC interface and X86 computer connection
2. Run sudo reboot loader on the shell，The machine will enter loader mode, as shown in the following figure

3. Click on the tool to force entry into maskrom mode

4. Check the option to force writing by address

5. Burning, the machine will automatically restart after completion

plumlis

@george Nice, I'll try it.

Btw I finally figured out why my USB Disk can't boot up.

The the fedora image you gave me have Boot up info in cmdline like this:

rootfs=LABLE=writable

And my EMMC also has a parttion labled writable(dafault).

So actually it booted up from usb disk, but set writable lable on emmc as root, So I boot back to my ubuntu. That mislanding me ths USB disk can't be boot up.

I changed to rootfs=UUID=(my usb disk UUID). And I can boot into fedora image now.

george

@plumlis
You can change the EMMC label to writable1 or another name.

plumlis

Upgrade finished, Seems boot up speed much faster than before.

Will play around with fedora image.

BTW I compiled kernel 6.1 from github https://github.com/yanyitech/coolpi-kernel kernel 6.1 branch and It can't boot up.

Hope new kernel will come soon.

Many thanks for your help.

plumlis

Just uncheck "Use recommended performance settings" and "Use hardware acceleration when available" in Firefox settings will fix this issue.

But also will have no GPU acceleration.

george

@plumlis
FFmpeg can be changed to a native package. Or using the Chromium browser, the decoding issue of this player has been bothering us for a long time. Take some time later to focus on solving it.