-
@AugustRobot_Zou
还未完整测试所有接口。 -
大 大法师 referenced this topic on
-
@大法师
请问有支持python3.6的 .whl安装包吗？
我的docker环境是unbuntu18.04+py2.7+py3.6.9的，CPi.GPIO-1.0.0-cp38-cp38-linux_aarch64.whl安装不了。
或者有没有其他方式，驱动gpio -
@AugustRobot_Zou
所有的底层封装操作都是基于访问/sys/class/gpio/ -
@大法师
请问能麻烦编译一个python3.6.9的安装包吗？
使用CPi.GPIO-1.0.0-cp38-cp38-linux_aarch64.whl，必须装上python3.8。
我的docker环境是ubuntu18.04+python3.6.9+ROS。装了python3.8后，同时存在python3.8和python3.6，导致原本的代码程序很多python版本适配问题，这几天为这个问题搞得头大，很难兼顾 CPi.GPIO库和原来的程序，模块脚本的#!/usr/bin/python3 只能配置2选1（3.8 or 3.6 )。
-
@AugustRobot_Zou okay!
-
-
@jack_admin @大法师
Really appreciate your help!
Now our system is basically compatible with coolp4B，which used to running on raspberry-pi4B. -
A AugustRobot_Zou referenced this topic on
-
J jack_admin referenced this topic on
-
有python3.9版本的吗
-
@xingzhan2012 有。在帖子最顶楼
-
@jack_admin 谢谢
-
Does the coolpi have a DPI mode for the gpio like the RPI4?
-
@Macs said in coolpi 4b python3 gpio operation compatable with raspberry pi:
Does the coolpi have a DPI mode for the gpio like the RPI4?
WiringPi ?
-
@jack_admin I mean can output video signal on the gpio using with custom timings, like you can on the RPI4?
-
请问支持C++语言吗
-
@Orion C++可以代码文件操作gpio，不需要调用python库
-
@jack_admin 请问C++需要包含哪个库呢，是writtingPi吗
-
@Orion 直接裸操作/sys/class/gpio，不做二次包装
-
it says in the GPIO page that all gpio are configurable with pullup or pulldown mode. How can we access the pull down resistor on a input pin say pin 32 GPIO105 that is default set to pullup? I tried the same convention as raspberry pi python access which is
GPIO.setup([pin#], GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
and i get the error no PUD_DOWN in the module. Can you post the entire documentation with included commands in this module?
-
@zensation not support setting pullup/down in user space now.
-
This post is deleted!