ÿDDR V1.10 75d050770f typ 23/02/28-20:47:10 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:28.5%, TX Vref:22.8%,21.8% CH1 RX Vref:28.4%, TX Vref:23.8%,23.8% CH2 RX Vref:28.5%, TX Vref:22.8%,23.8% CH3 RX Vref:28.5%, TX Vref:24.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-557-g9609b9c19:derrick.huang NOTICE: BL31: Built : 14:29:57, Mar 8 2023 INFO: spec: 0x1 INFO: ext 32k is valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 COOLPI LOADER BY YANYI(Apr 11 2023) DRAM: 8 GiB Using default environment 0 2 1 3 6 8 7 9 hdmi@fde80000 disconnected boot mode: None Net Initialization Skipped Autoboot in 1 seconds hdmi@fde80000 disconnected MMC: no card present mmc_init: -123, time 1 starting USB... Bus usb@fc800000: USB EHCI 1.00 Bus usb@fc840000: USB OHCI 1.0 Bus usb@fc880000: USB EHCI 1.00 Bus usb@fc8c0000: USB OHCI 1.0 Bus usb@fc400000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fc800000 for devices... WARN: interface 0 has 2 endpoint descriptor, different from the interface descriptor's value: 1 WARN: interface 1 has 14 endpoint descriptor, different from the interface descriptor's value: 2 3 USB Device(s) found scanning bus usb@fc840000 for devices... 1 USB Device(s) found scanning bus usb@fc880000 for devices... 1 USB Device(s) found scanning bus usb@fc8c0000 for devices... 1 USB Device(s) found scanning bus usb@fc400000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device scanning bus for devices... SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp fbss pio slum part ccc apst Device 0: unknown device switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf reading /extlinux/extlinux.conf 294 bytes read in 4 ms (71.3 KiB/s) 1: Linux coolpi Retrieving file: /initrd.img reading /initrd.img 8775086 bytes read in 51 ms (164.1 MiB/s) Retrieving file: /Image reading /Image 37571072 bytes read in 207 ms (173.1 MiB/s) append: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,115200n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:d6:93:52:72:6f:a8 Retrieving file: /rk3588-cpcm5-evb-v11.dtb reading /rk3588-cpcm5-evb-v11.dtb 161379 bytes read in 5 ms (30.8 MiB/s) ## Flattened Device Tree blob at 0x0a100000 Booting using the fdt blob at 0x0a100000 'reserved-memory' cma: addr=10000000 size=8000000 Loading Ramdisk to eb172000, end eb9d05ae ... OK Loading Device Tree to 00000000eb147000, end 00000000eb171662 ... OK Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000) Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000) Starting kernel ... I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot [ 10.363556] rk-pcie fe180000.pcie: IRQ msi not found [ 10.363571] rk-pcie fe180000.pcie: Missing *config* reg space [ 10.363617] rk-pcie fe190000.pcie: IRQ msi not found [ 10.363634] rk-pcie fe190000.pcie: Missing *config* reg space [ 10.363704] rk-pcie fe180000.pcie: Missing *config* reg space [ 10.363728] rk-pcie fe180000.pcie: invalid resource [ 10.363742] rk-pcie fe190000.pcie: Missing *config* reg space [ 10.363764] rk-pcie fe190000.pcie: invalid resource [ 10.367311] mpp-iep2 fdbb0000.iep: allocate roi buffer failed [ 10.368479] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! [ 10.368483] rkvdec2_init:1010: No niu aclk reset resource define [ 10.368487] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! [ 10.368490] rkvdec2_init:1013: No niu hclk reset resource define [ 10.369009] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! [ 10.369013] rkvdec2_init:1010: No niu aclk reset resource define [ 10.369016] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! [ 10.369019] rkvdec2_init:1013: No niu hclk reset resource define [ 10.370724] mpp_iommu_probe:434: failed to get device node [ 10.370728] mpp_av1dec av1d-master: failed to attach iommu [ 10.374390] rk-pcie fe150000.pcie: IRQ msi not found [ 10.374397] rk-pcie fe150000.pcie: Missing *config* reg space [ 10.374446] rk-pcie fe150000.pcie: Missing *config* reg space [ 10.374466] rk-pcie fe150000.pcie: invalid resource [ 10.374732] rk-pcie fe160000.pcie: IRQ msi not found [ 10.374745] rk-pcie fe160000.pcie: Missing *config* reg space [ 10.374824] rk-pcie fe160000.pcie: Missing *config* reg space [ 10.374851] rk-pcie fe160000.pcie: invalid resource [ 10.567790] dw-dp fde50000.dp: failed to attach bridge: -517 [ 10.767480] rk806 spi2.0: no sleep-setting state [ 10.772098] rk806 spi2.0: no reset-setting pinctrl state [ 10.777402] rk806 spi2.0: no dvs-setting pinctrl state [ 10.787090] rk_gmac-dwmac fe1b0000.ethernet: no regulator found [ 10.793013] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay. [ 10.800140] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff [ 10.806778] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx [ 10.813474] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx [ 10.820175] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed [ 11.292167] imx219 4-0010: Failure to read Model ID (high byte) [ 11.329579] : terminal subdev does not exist [ 11.333863] : terminal subdev does not exist [ 11.338135] : terminal subdev does not exist [ 11.342410] : terminal subdev does not exist [ 11.346684] : get_remote_sensor: video pad[0] is null [ 11.351737] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 11.358957] : get_remote_sensor: video pad[0] is null [ 11.364009] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 11.371237] : get_remote_sensor: video pad[0] is null [ 11.376294] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 11.383520] : get_remote_sensor: video pad[0] is null [ 11.388574] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 11.397125] rockchip-mipi-csi2: Async registered subdev [ 11.467568] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 11.474860] rockchip-dmc dmc: dev_pm_opp_set_regulators: no regulator (center) found: -19 [ 11.483031] rockchip-dmc dmc: failed to set regulators [ 11.490375] debugfs: File 'Capture' in directory 'dapm' already present! [ 11.497715] debugfs: File 'Capture' in directory 'dapm' already present! [ 11.505268] debugfs: File 'Capture' in directory 'dapm' already present! [ 11.537218] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present! [ 11.547142] rockchip-dmc dmc: dev_pm_opp_set_regulators: no regulator (center) found: -19 [ 11.555338] rockchip-dmc dmc: failed to set regulators [ 11.583759] dw-dp fde50000.dp: failed to attach bridge: -517 [ 11.730008] debugfs: File 'Left Hp mixer' in directory 'dapm' already present! [ 11.737222] debugfs: File 'Right Hp mixer' in directory 'dapm' already present! [ 11.744518] debugfs: File 'HPCP L' in directory 'dapm' already present! [ 11.751117] debugfs: File 'HPCP R' in directory 'dapm' already present! [ 11.757731] debugfs: File 'HPVOL L' in directory 'dapm' already present! [ 11.764424] debugfs: File 'HPVOL R' in directory 'dapm' already present! [ 11.780146] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes [ 11.787987] rockchip-drm display-subsystem: route-hdmi1: failed to get logo,offset [ 11.795544] rockchip-drm display-subsystem: failed to show kernel logo [ 11.908669] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 12.148668] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 12.284475] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 12.293601] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 12.302716] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP [ 12.310588] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 12.319705] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP [ 12.328594] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff] [ 12.337108] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff] [ 12.345619] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff] [ 12.357789] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present! [ 12.388943] RKNPU fdab0000.npu: failed to find power_model node [ 12.394855] RKNPU fdab0000.npu: RKNPU: failed to initialize power model [ 12.401455] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient writable: recovering journal writable: clean, 138637/3777312 files, 1837532/15132672 blocks [ 13.265331] rk-pcie fe160000.pcie: PCIe Link Fail [ 13.270054] rk-pcie fe160000.pcie: failed to initialize host [ 13.436383] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add [ 13.541979] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 13.588169] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 13.591361] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 13.591362] rkcif_scale_ch2: update sensor info failed -19 [ 13.593202] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 13.593203] rkcif_scale_ch3: update sensor info failed -19 [ 13.593481] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 13.593482] rkcif_tools_id2: update sensor info failed -19 [ 13.593907] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 13.593908] rkcif_tools_id0: update sensor info failed -19 [ 13.597418] stream_cif_mipi_id1: update sensor info failed -19 [ 13.599889] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 13.599891] rkcif_scale_ch0: update sensor info failed -19 [ 13.600052] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 13.600054] stream_cif_mipi_id0: update sensor info failed -19 [ 13.600099] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 13.600100] stream_cif_mipi_id3: update sensor info failed -19 [ 13.601381] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 13.601384] rkcif_tools_id1: update sensor info failed -19 [ 13.602582] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 13.602582] rkcif_scale_ch1: update sensor info failed -19 [ 13.606699] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 13.641281] stream_cif_mipi_id2: update sensor info failed -19 [ 13.655304] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 13.781968] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 13.895391] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 15.982063] Bluetooth: hci0: command 0xfc09 tx timeout [ 21.326520] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 21.335655] stream_cif_mipi_id0: update sensor info failed -19 [ 21.341740] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 21.350871] stream_cif_mipi_id1: update sensor info failed -19 [ 21.356870] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 21.365996] rkcif_tools_id2: update sensor info failed -19 [ 21.371712] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 21.380847] stream_cif_mipi_id2: update sensor info failed -19 [ 21.386972] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 21.396116] stream_cif_mipi_id3: update sensor info failed -19 [ 21.402162] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2) [ 21.409052] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 21.418180] rkcif_scale_ch0: update sensor info failed -19 [ 21.423653] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2) [ 21.430538] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 21.439665] rkcif_scale_ch1: update sensor info failed -19 [ 21.445345] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 21.454475] rkcif_scale_ch2: update sensor info failed -19 [ 21.460150] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 21.469273] rkcif_scale_ch3: update sensor info failed -19 [ 21.474943] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 21.484065] rkcif_tools_id0: update sensor info failed -19 [ 21.489716] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 21.498835] rkcif_tools_id1: update sensor info failed -19 [ 21.858757] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 21.971965] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 22.008384] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off [ 22.018376] hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 22.039128] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off [ 22.049118] hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 22.069948] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off [ 22.079947] hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 22.089502] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 22.201969] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 22.332176] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 22.341324] rkcif_scale_ch2: update sensor info failed -19 [ 22.347668] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 22.356807] stream_cif_mipi_id3: update sensor info failed -19 [ 22.362988] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 22.372121] rkcif_tools_id0: update sensor info failed -19 [ 22.377658] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 22.386783] stream_cif_mipi_id0: update sensor info failed -19 [ 22.392776] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 22.401913] stream_cif_mipi_id2: update sensor info failed -19 [ 22.407843] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 22.416969] stream_cif_mipi_id1: update sensor info failed -19 [ 22.423296] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 22.432426] rkcif_tools_id1: update sensor info failed -19 [ 22.437925] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 22.447041] rkcif_tools_id2: update sensor info failed -19 [ 22.452528] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 22.461656] rkcif_scale_ch0: update sensor info failed -19 [ 22.467526] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 22.476650] rkcif_scale_ch1: update sensor info failed -19 [ 22.482147] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 22.491264] rkcif_scale_ch3: update sensor info failed -19 [ 22.758671] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 22.872005] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 22.985337] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 23.098671] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 23.875464] Bluetooth: hci0: Failed to send firmware data (-110) [ 23.881555] Bluetooth: hci0: sending frame failed (-19) [ 23.955406] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 24.068808] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 24.255330] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 24.368754] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 25.835336] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 25.948668] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 26.132001] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 26.245335] tinker-ft5406: tinker_ft5406_start_polling: touch is not ready [ 27.136085] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(3) [ 27.157435] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(3) [ 27.787369] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off [ 27.797364] hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 27.818182] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off [ 27.828173] hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 27.848883] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_startup: device is no connected or audio is off [ 27.858871] hdmi-audio-codec hdmi-audio-codec.8.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 27.929522] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 27.938653] stream_cif_mipi_id0: update sensor info failed -19 [ 27.944535] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 27.953656] stream_cif_mipi_id1: update sensor info failed -19 [ 27.959530] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 27.968649] rkcif_tools_id2: update sensor info failed -19 [ 27.974175] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 27.983300] stream_cif_mipi_id2: update sensor info failed -19 [ 27.989268] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 27.998388] stream_cif_mipi_id3: update sensor info failed -19 [ 28.004266] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 28.013382] rkcif_scale_ch0: update sensor info failed -19 [ 28.018904] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 28.028020] rkcif_scale_ch1: update sensor info failed -19 [ 28.033543] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 28.042658] rkcif_scale_ch2: update sensor info failed -19 [ 28.048179] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 28.057296] rkcif_scale_ch3: update sensor info failed -19 [ 28.062819] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 28.071933] rkcif_tools_id0: update sensor info failed -19 [ 28.077453] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 28.086567] rkcif_tools_id1: update sensor info failed -19 Ubuntu 22.04.2 LTS Ubuntu ttyS0 Ubuntu login: